This is a large table for corners outside your kitchen, dining room, workspace or bed. It’s as perfect as a computer desk for your laptop. The list of materials consists of the top, legs, rear/rails, apron/center rails and curved apron. The only hardware needed is round wood screw and biscuits. This is a good project for an early carpenter. Let’s see how to build DIY computer desk:
Prepare materials and parts that fit the size. This table requires 12 feet board 8/4 stock and 6 feet stock boards 4/4. The top is maple and legs, aprons and rails made of poplar. The aircraft 8/4 stock becomes 1 1/2 inch then ripped up to 1 1/2 inch. Cut 4 pieces for feet. Glue pieces are left to the top side. 4/4 plane of stock 1/4 inch thick. Use this to cut rails, rear apron, and central apron. The lagging wood should be planned to 1/2 inch to create a curved apron.
Stretch stock for bending jigs. Glue with pieces of plywood for jig bending. You need a block of 4 inches by 6 inches wide by 21 inches. Create a bending jig. Lay out the curve, and then cut it with a band saw. Bend a curved apron. On every curved apron board, cut the noise in 3/8 inch. Their space is 3/4 inch apart. Glue two back-to-back boards and tap them on a bent jig at 90 degrees.
Inside this how to build a diy computer desk gallery you'll learn more paleoart that will inspire you about computer desk such as desk plans diy ideas, diy computer desk ideas, diy desk plans, free computer desk plans, free desk plans and many more.
12 How To Build A DIY Computer Desk Photos