DIY TV Stand For A Plasma TV

Author: Rosemary J. Johnson | Categories: Furniture Ideas comments
Amazing DIY TV Stand

DIY TV Stand – Many love the appearance of a neat plasma TV hanging on the wall. However, due to the cables or restrictions of the wall construction, this is not always practical. A plasma TV requires a solid foundation to support its weight and add other equipment that you want to mount underneath. One of the most popular methods of DIY TV stand is to use threaded rods and medium density fiber board.

Cut MDF stand to the required depth and width for DIY TV stand.  Base the width on the total measurement of the components, center channel speaker or plasma base if you will not use other components. Depth is based on the deepest audio / video component or twice the depth of the plasma base at the minimum. Paint or stain the stand as you wish. Wait for the interval recommended by the manufacturer for the curing times of the paint or dyeing. Drill a whole 1 inch (2.5 cm) to 1 inch (2.5 cm) from the corner of each TV stand after the layer has completely cured.

RELATED:   Innovative Modern Dresser

DIY TV stand. Rotate a nut, metal and rubber washer 1/2 inch (1.2 cm) from the ends of four of the threaded rods. Slide the MDF panel chosen as the base TV stands on the four poles, with the rubber washers in direct contact with the bottom of the stand. Slide a rubber washer, a metal washer and a nut to adjust the TV stand with the first set of equipment. Continue adding TV stand in the same way as the base until reaching the desired height.

RELATED:   Unusual Mid Century Furniture

Inside this diy tv stand for a plasma tv gallery you'll learn more figure that will inspire you about furniture ideas such as diy tv stand, diy tv stand ideas, diy tv stand mount, diy tv stand rustic, diy tv stand with storage and still lot more.

Comments are closed.

https://cento.hazelwoodchildren.com/ -->